Texas Speed Gen 5 LT L83 5.3L Truck L83TR-1 Camshaft 32% Fuel Lobe
TSP GEN 5 L83 5.3L TRUCK L83TR-1 CAM 32% FUEL LOBE
CAMS SPECS: 212/220, .635"/.635", 112 LSA (Lift w/ 1.8:1 Rocker Ratio)
The Gen 5 L83 5.3L engine utilizes Variable Valve Timing (VVT) controlled via a cam phaser. A cam phaser is a computer-controlled cam gear that automatically optimizes camshaft timing based on the current engine RPM. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance cams due to the wide range of valve timing movement and constantly changing piston-to-valve clearance. With the help of Texas Speed's Superflow 902 engine dyno, we are able to custom-design camshafts and phaser tuning tables to allow our gen 5 L83 customers the ability to purchase the ultimate in L83 performance camshafts! Thanks to our Superflow 902 dyno, Texas Speed is the only company that currently offers a VVT camshaft with a phaser table included to properly tune the camshaft phaser once it's installed in your 2014+ L83 truck!
The Texas Speed & Performance L83TR-1 camshaft is a great choice for the enthusiast looking for an additional jump in horsepower without sacrificing any drivability. It will have a smooth idle and drive similar to stock. It does remove the factory AFM/DOD system that deactivates cylinders, but it retains the variable valve timing (VVT) system that allows the engine to advance and retard the cam while the engine is running. This provides a much better power curve since the engine can advance the cam in the lower RPM's for better torque and retard the cam in the upper RPM's for better horsepower. We do recommend using the TSP .660" dual spring kit with PAC springs and titanium retainers and TSP hardened chromoly pushrods with this camshaft.
Each Gen 5 L83 camshaft Texas Speed offers will require the use of a phaser limiter kit. The phaser limiter restricts the range of cam timing movement. This modification provides the necessary valve clearance for serious performance camshafts with tighter lobe separations while still utilizing the benefits of the VVT technology.
We do recommend the +32% fuel lobe for any vehicles that are using a power-adder. The +32% fuel lobe does require a lash cap, so please make sure that you install one during the camshaft installation!
All of our TSP L83 camshafts were designed on our SuperFlow 902 engine dyno using an otherwise stock 5.3L L83 engine. We design and test many different camshafts before selecting the camshafts that we offer to our customers. This provides us with a distinct advantage of offering the best power curve possible without sacrificing overall performance, as well as knowing that what we offer is also safe and will not have any piston-to-valve clearance issues. We test our products before we sell them, so you KNOW that you are purchasing a camshaft that is proven!
TSP 5.3L L83TR-1 Camshaft fits the following vehicle(s):
- 2015 Cadillac Escalade
- 2016 Cadillac Escalade
- 2017 Cadillac Escalade
- 2018 Cadillac Escalade
- 2019 Cadillac Escalade
- 2014 Chevrolet Silverado 1500
- 2015 Chevrolet Silverado 1500
- 2016 Chevrolet Silverado 1500
- 2015 Chevrolet Suburban
- 2016 Chevrolet Suburban
- 2017 Chevrolet Suburban
- 2018 Chevrolet Suburban
- 2019 Chevrolet Suburban
- 2015 Chevrolet Tahoe
- 2016 Chevrolet Tahoe
- 2017 Chevrolet Tahoe
- 2018 Chevrolet Tahoe
- 2019 Chevrolet Tahoe
- 2014 GMC Sierra 1500
- 2015 GMC Sierra 1500
- 2016 GMC Sierra 1500
- 2015 GMC Yukon
- 2016 GMC Yukon
- 2017 GMC Yukon
- 2018 GMC Yukon
- 2019 GMC Yukon